Category Archives: CAN4VSCP Vilnius

Vilnius out and away #IOT #M2M

Next module in this run is the Vilnius module.  This module is an analog to digital unit with four channels 0-5V or 0-10V. This module concludes the CAN4VSCP series for a while (will be continued later). We will now  concentrate more on the Ethernet and 802.15.4 wireless cards but also on some low cost 433 MHz solutions.

The module will be available in the FrogShop in August.

vilnius_brd_rev_B vilnius_sch1_rev_B

vilnius_sch2_rev_B

CAN4VSCP-RS-232 PCB cards

001

can4vscp_rs232_cards_small

CAN4VSCP-RS-232 PCB cards for the first batch of our third device was received for the factory in China today.  This card can be used in two modes. Either it can work as a simple and low-cost interface between a computer or similar and the CAN4VSCP bus or alternatively  it can work  as a standard node on a CAN4VSCP bus that streams RS-232 data which either is predefined or dynamic content.

We expect the module to be available in the FrogShop in about two weeks.

The Paris and the Kelvin modules is already available for delivery and will be followed by the Beijing A0, Accra A0, and the Vilnius A0 modules this spring.