Categories
General

Refridgerator defrost (by wife)

Beer will soon be cold again…

Categories
CAN4VSCP CAN4VSCP Kelvin NTC10KA CAN4VSCP Paris Demo HowTo's

The story about an old Fridge #m2m #vscp #IoT #thingspeak

By Ake Hedman One day the fridge in our house died. Probably due to a recent thunderstorm.  Panic of course  and when I noticed that it was totally dead I bought a new one and saved the situation. The fridge was left in its location and later I realized that the control logic inside it […]

Categories
VSCP

Fridge temp. Harmless? #VSCP #IoT

  The diagrams above may seem harmless enough. The temperature in a fridge in our house.  Sent to ThingSpeak by a VSCP Daemon and received from a Kelvin temperature node. But the knee on the fridge temperature diagram show that I open the door to get my lunch.  And this information can of course be […]

Categories
MQTT VSCP

VSCP MQTT demo

The VSCP MQTT demo code is now also live on our demo server. This is probably the most ugly and boring demo around – it will improve over time – but the technique behind it is interesting. At the moment it basically just show the temperature in our fridge in some different ways. Not very […]

Categories
Demo MQTT VSCP websockets

Demo: Live VSCP MQTT data over websockets

Added some initial demo code for VSCP MQTT events over websockets. Currently a page with an unformatted live event list is available and a gauge displaying the fridge temperature in our kitchen. The code is here https://github.com/grodansparadis/vscp-demo-mqtt-web This is initial work and work in progress so please expect a lot of changes and improvements. Posted […]

Categories
CAN4VSCP

Nice and stable

I have had CAN4VSCP boards running now for many years here on the VSCP hill. Setups like the above for my weather station, take care of things like hot water generation, fridge control, pellets stove and heater, alarms, lights and much, much, much more. The setup is actually incredible stable and have survived many thunderstorms, […]

Categories
General

Current temperatures at the #VSCP hill

Outside under the snow: -8.9 C Outside: -5,4 C Inside compost 1: -1.3 C Inside compost 2: +0.2 C Office: + 22.4 C Raspberry Pi 1 CPU temp: +51.3C Raspberry Pi 1 GPU temp:  +51.9 C Inside fridge: -21.5 C Inside refrigerator upper: +5.55C Me: +36.4 C Life is good!

Categories
General HowTo's

Howto: Practical use of #VSCP Remote Variables @thingspeak

See The story about an old fridge and VSCP module setup – refrigirator control part 1 , part 2, part 3, part 4  for earlier parts about this setup. You have a VSCP system (or other system) setup that control something. and now you want to share some of this information up to the cloud.  One typical problem […]

Categories
CAN4VSCP Bejing CAN4VSCP Kelvin NTC10KA HowTo's

Refrigerator project Part 4 #IoT #m2m #VSCP

This (upper cabinet of refrigerator) and this (lower cabinet of refrigerator)   is live data from the refrigerator project described here,  here and here. First of all, this is quite a complex way to do this, it could have been solved in an easier way. But I wanted to test the modules Grodans Paradis AB […]

Categories
CAN4VSCP Bejing CAN4VSCP Kelvin NTC10KA CAN4VSCP Paris HowTo's VSCP

Refrigerator control Part 3 #VSCP #IoT #m2m

The refrigerator again. It takes more time then expected of course. It always do. This time because I have a lot of other things to attend to at the moment.  I understand if you ask some questions about this project. So I answer them here (before you actually ask them) Why this project? Our refrigerator […]