Beijing I/O #VSCP control module #IoT #m2m

Clipboard01

The Beijing I/O VSCP control module is now available in the FrogShop.

The module has ten 5V channels that individually can be set to either an input or an output.

Each output can have a pulse automatically  generated.

Each channel can have a protection timer associated with it which turns it off after a specified time. This can be used as a security feature so that a critical controlled resource is not kept on when a communication line has been lost but can be used to keep an output on for a specific time for other uses.

TurnOn/TurnOff or On/Off events can be generated when  signals go high/low.  This is valid both for inputs and outputs. Perfect for monitoring systems or for autonomous control of other VSCP modules.

Alarm events can be generated when a pin change state. Perfect for alarm setups.

State of inputs/outputs can be streamed with configurable time interval.

Inputs can be used as button inputs with repeat.

The Beijing module have a decision matrix with eight entries that can set a pin high or low,  toggle a pin, send status for a pin or all pins, or turn on/off  pulse on a pin. This makes it easy to construct autonomous systems.

The module can be wall mounted or attached to a DIN rail as all modules in the CAN4VSCP series from Paradise of the Frog.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.