Categories
General HowTo's VSCP

#VSCP HOWTO: DM Using timers

Timers. One can wonder what they do in the decision matrix? They even have their own events defined in the CLASS2.VSCP class.

First let us define what a VSCP timer is.

A VSCP timer is a free running 32-bit timer with millisecond resolution.  That is they can hold  0xffffffff = 4294967295 milliseconds which mens they will roll over in about 50 days.

There are actions defined to

There is the following  internal events defined related to timers

To create and start a timer

<row enable="true" groupid="timers" >

  <comment>
    Create timer
  </comment>

  <mask priority="0"
        class="0xFFFF"
        type="0xFFFF"
 GUID="00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00" />

  <filter priority="0"
          class="65535"
          type="23"
 GUID="00:01:02:03:04:05:06:07:08:09:0A:0B:0C:0D:0E:0F" />

  <action>0x60</action>
  <param>
    1;10;timer1flag;true
  </param>

</row>

Here a timer with id = 1 is created. The timer has an initial time set to 10 seconds. When this timer elapses it will set the variable //timer1flag// to true. The last argument is the reload flag. Here it is set to true so when the time has elapsed the initial value will be loaded again and the timer will start again.

In the example above we could have added “;4” at the end of the parameter which would have the effect that the reload would stop after four runs. Default is thus forever.

When the timer is started a CLASS2.VSCPD, Type = 25 (0x0019) Timer started event is generated. When the ten seconds has gone and the timer elapses the  CLASS2.VSCPD, Type = 29 (0x001D) Timer Elapsed event is generated.

We can use either one of these two generated events to do any action periodically like this.

<row enable="true" groupid="timers" >

  <comment> 
    Handle timer elapsed
  </comment>

  <mask priority="0"
        class="0xFFFF"
        type="0xFFFF"
 GUID="00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00" />

  <filter priority="0"
          class="65535"
          type="29"
 GUID="00:01:02:03:04:05:06:07:08:09:0A:0B:0C:0D:0E:0F" />

  <action>0x70</action>
  <param>
    /srv/vscp/timefile;1;%isoboth: Timer with  id=%event.data.int32[0] elapsed %lf
  </param>

</row>


<row enable="true" groupid="timers" > 

   <comment> Handle timer elapsed </comment> 
   <mask priority="0" 
         class="0xFFFF" 
         type="0xFFFF" GUID="00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00" /> 
    <filter priority="0" 
            class="65535" 
            type="25" GUID="00:01:02:03:04:05:06:07:08:09:0A:0B:0C:0D:0E:0F" /> 

    <action>0x70</action> 
    <param> 
      /srv/vscp/timefile;1;%isoboth: Timer with id=%event.data.int32[0] elapsed counter=%event.data.uint32[0]ms %lf </param> </row>

Here some info is just written to a file when the timer is started and when it elapses.   But if you want to send an event periodically instead or do other actions this is the way to do it.

You don’t have to give a variable nor a reload flag when you start a timer. If no variable is given (use ;;) it is just ignored. The reload value will be set to false as default  value, that is the timer will run only once. As the last parameter you can set the number of times the timer should reload before it should stop.  The full documentation is here and here.

One useful use of timers is to handle resend of events. The working is like this

Send the event you expect a reply event from another node.

  1. Create/start a timer that have  period equal to resend intervals for the event you want to send. The timer should  have true for autoloading and the number of autoloads set to the number of resend that are allowed.  You can trigger the creation of the timer  by make a DM entry that triggering on one of the reserved events for example,  CLASS1.LOCAL  or CLASS1.LABORATORY so that when you send this local event  the actual event will be sent (see next point)
  2. In the timer started event send  the event you want to send.
  3. When/If the expected reply  is received pause the timer.
  4. Now if the timer the timer stopped event is detected the reply wait timeout has expired so do timeout handling there by sending another local event or CLASS1.ERROR, Type = 32 Time out.

Can be used for much more of course. Just useful and simple.

Categories
Measurement Techniques

Common Mode Voltage in Signal Conditioning

Good article from Dataforth as usual.