A goiod friend from Germany, Andreas Merkle (BlueAndi), (old VSCP’ers knows him well as he done a lot of nice & valuable VSCP work) sent this video and I think it is so nice so I want to share it. Outside temperature here on the VSCP hill at 20:20 today as when the video was shot.
The device showing the info is Andys very nice project esp-rgb-led-matrix. Checkit out!
VSCP: You can look at device for device and create control software for each and one of them, we did it another way, we though of a
black box device and created control software that works with everything that exists.
One to unite them all.
@eMbeddedHome
Source: Running Linux with kernel 6.3 on Open Source Hardware board with ESP32-S3! | olimex
Electronics is so colorful an goldy so I could have been in this game just because of that.
Old man. Old cat. Old table. New technology.
If you have mosquitto clients installed on a computer you can write
mosquitto_sub -h test.mosquitto.org -p 1883 -t vscp/#mosquitto_sub -h test.mosquitto.org -p 1883 -t vscp/25:00:00:00:00:00:00:00:00:00:00:00:0D:02:00:01/20/#you will instead see when I walk into and out the door through my office.
If you dare you can writemosquitto_sub -h test.mosquitto.org -p 1883 -t vscp/25:00:00:00:00:00:00:00:00:00:00:00:0D:02:00:02/1040/6/2/6/#and you will get the temperature at our entrance. Or write
mosquitto_sub -h test.mosquitto.org -p 1883 -t vscp/25:00:00:00:00:00:00:00:00:00:00:00:0D:02:00:02/1040/6/2/0/#mosquitto_sub -h test.mosquitto.org -p 1883 -t vscp/FF:FF:FF:FF:FF:FF:FF:FF:61:00:08:01:92:AF:A8:10/10/6/16/0/#And you will get the temperature at the south side of our house. And yes, you understand and interpret the temperature value correct if you are in Europe or in some other place of the world. It is that easy. That is tru for other measurements to
More sensors can be found here https://github.com/grodansparadis/vscp/wiki/VSCP-Demo-GUID%27s.
But there is a risk you go crazy if you start to dig into all of that info. After all it is to simple to work in the first place…
Or something like that…
So finally the cards and the stencil for Frankfurt Wifi arrives. I have been waiting eagerly for this. This is CAN4VSCP <-> MQTT / vscp-espnow / vscp-tcpip-link.
Still is missing some components but they should arrive in a month or so.
